T TCB Member Nov 20, 2010 #1 commercial work in dine rm location , requirements for recpt spacing and or is any even required ? , conduit fill 1/2'' & 3/4'' ?
commercial work in dine rm location , requirements for recpt spacing and or is any even required ? , conduit fill 1/2'' & 3/4'' ?
augie47 Moderator Staff member Location Tennessee Occupation State Electrical Inspector (Retired) Nov 20, 2010 #2 TCB said: commercial work in dine rm location ,? Click to expand... None TCB said: requirements for recpt spacing and or is any even required ? , conduit fill 1/2'' & 3/4'' ? Click to expand... NEC Appendix C (pg 708 in '08).... usually limited by NEC 310.15(B)(2)(a)
TCB said: commercial work in dine rm location ,? Click to expand... None TCB said: requirements for recpt spacing and or is any even required ? , conduit fill 1/2'' & 3/4'' ? Click to expand... NEC Appendix C (pg 708 in '08).... usually limited by NEC 310.15(B)(2)(a)
ceb58 Senior Member Location Raeford, NC Nov 20, 2010 #4 The plans should show the location, if any, for the recpts.
augie47 Moderator Staff member Location Tennessee Occupation State Electrical Inspector (Retired) Nov 20, 2010 #6 Code only requires per 210.63, 600.5
Buck Parrish Senior Member Location NC & IN Nov 20, 2010 #7 TCB said: plans show none . how bout required by code. Click to expand... The dinning room requirements are for 'dwelling' units.
TCB said: plans show none . how bout required by code. Click to expand... The dinning room requirements are for 'dwelling' units.
ceb58 Senior Member Location Raeford, NC Nov 21, 2010 #8 TCB said: plans show none . how bout required by code. Click to expand... None requried for the dinning room. If they are not on the plans,which is a bad idea, then it doesnt get them. Sounds like an oversight on the drawings and its time for a change order.
TCB said: plans show none . how bout required by code. Click to expand... None requried for the dinning room. If they are not on the plans,which is a bad idea, then it doesnt get them. Sounds like an oversight on the drawings and its time for a change order.