Wiring a latch / unlatch relay

[bpk]

I have a job that is giveing me a headache. I have radio activated reciever that has 1 NO and 1 NC contact shareing the same common. There is a handheld transmitter with 1 button that momentarily activates the reciever. I need to use this to activate a warning light / ideally 1 button push turns it on / the next button push turns it off. The only power supply is 12vdc (solar). Any ideas?

 

[ptonsparky]

A PICO controller could help with a little simple programming. A CLICK from AD is inexpensive but not sure about the 12V operation for that. I don't remember seeing a 12v option. A few of the radio type recievers I have looked at can be programed to latching outputs. I have not used one as yet.

 

[nhfire77]

Would a 12v latching relay work?
http://www.alarmsaf.com

 

[Open Neutral]

I need to use this to activate a warning light / ideally 1 button push turns it on / the next button push turns it off. The only power supply is 12vdc (solar). Any ideas?

So you need a flip-flop. You can make such from relays, or buy one.

 

[ptonsparky]

So you need a flip-flop. You can make such from relays, or buy one.

That was just to easy.:thumbsup:

 

[bpk]

Thanks alot, that is exactley what I need. You guys are awesome

 

[mbeatty]

So you need a flip-flop. You can make such from relays, or buy one.

Beat me to it, but I agree.