jwatts
Member
- Location
- Chicago, IL
Just finished installing a stand by whole house generator. The ATS was mounted adjacent to the meter outside. I bonded the ATS since this is now my service disconnect. Problem I found is that I can not find a bonding screw inside the existing 200 amp panel. It is a Murray panel. The bus bar on the left is all grounds, and the one on the right is all neutrals. Both bars are bonded to the enclosure. There is also a strap that ties the two bars together. Pretty sure I am double bonded? I believe this is a problem. Please confirm, and advise on how to resolve the issue.