Phase Converter?

Status
Not open for further replies.
Benton

Benton

Senior Member
Location
Louisiana
Hello,

I am in the market (customer) for a phase converter. Does anyone know where I can get one? The customer has a shop with a 120/240V service but has a 20hp planter, 20hp router, and a 25hp compressor all 208V 3 phase. Any help would be appreciated. He contacted the PC and they said it would be something like $10k for them to bring 3 phase to his property.
 
Rewire said:
it will probably be cheaper to install a converter at each peice of equipment
Click to expand...

For the equipment listed your looking at around $2500 each. Thats $7500 plus material and labor for install. Now POCO's 10K is looking pretty good.
 
chris kennedy said:
For the equipment listed your looking at around $2500 each. Thats $7500 plus material and labor for install. Now POCO's 10K is looking pretty good.
Click to expand...
There's also the question of whether the existing service will handle the added load(s)...???
 
I just looked at running a circuit for a cabinet guy. He runs his shop off of one phase converter (three pieces of equipment, soon to be four). He is a one man show, so only one machine runs at a time.
chris kennedy said:
For the equipment listed your looking at around $2500 each. Thats $7500 plus material and labor for install....
Click to expand...
Well sure, but when is more not better? Ex-wives, not so much perhaps, but tools and equipment....anything worth having has gotta be worth having more than one.:happyyes:
 
Benton said:
Hello,

I am in the market (customer) for a phase converter. Does anyone know where I can get one? The customer has a shop with a 120/240V service but has a 20hp planter, 20hp router, and a 25hp compressor all 208V 3 phase. Any help would be appreciated. He contacted the PC and they said it would be something like $10k for them to bring 3 phase to his property.
Click to expand...

two kinds. static, and rotary.

i've seen quite a number of the electronic ones catch fire.
i prefer rotary.

problem is, you are gonna have to use separate ones on
each load. you get a big enough one for all three, and you
will have scwewy phase shift on one motor only. they are
good for a specific range of horsepower.... unless...
you get the mothership.....

"This 60HP Phase Perfect Digital Solid-State Phase Converter
produces 3-phase output voltages that are balanced to within
1% under all load conditions."

$12,225.00

http://www.americanrotary.com/produ...phase-perfect/pt-3160-digital-phase-converter
 
Status
Not open for further replies.
Top