BillyE
New member
- Location
- greenville nc
Does a inspector have to inspect concrete pole base as in see hole depth,rebar cage..before concrete is poured other than inspecting piping depth of 18" ?
Pole lights
- Thread starter BillyE
- Start date
- Status
luckylerado
Senior Member
- Location
- Lake of the Ozarks
There is not a one size fit all answer to that question. Someone should verify the hole depth, concrete strength, bolt length and pattern and steel cage all meet up with manufacturers data for the wind load.
mgookin
Senior Member
- Location
- Fort Myers, FL
Code says you can not conceal work until after inspection.
Your inspector may waive that (even though he does not have the authority). Give him a call, or just call for inspection.
- Location
- Massachusetts
The code does not say that. Local rules or laws determine that.
BillyE, you would have to check you local rules or maybe someone from NC can answer.
jumper
Senior Member
- Location
- 3 Hr 2 Min from Winged Horses
I dunno, those fellers from NC seem kinda sketchy IMO.
PS. Bill this just a joke for a couple of regular members, not towards you.
In my area we have to get an inspection prior to pouring. Its also a separate building permit.
mgookin
Senior Member
- Location
- Fort Myers, FL
The code does not say that. Local rules or laws determine that.
BillyE, you would have to check you local rules or maybe someone from NC can answer.
Maybe the NEC doesn't say that but I'd like to see a code adopting statute and/ or building code (which adopts the electrical code) that doesn't say that.
- Location
- Simi Valley, CA
If they are engineered pole bases then they for sure need to be inspected.
- Status