Combination MV gang switch & fuse

[Bugman1400]

I'm not up to speed on my MV equipment. Anybody know of an outdoor MV gang switch & fuse combination that is typically used on distribution?

 

[zog]

A MV fused disconnect switch in NEMA 3R? That is very common and made by about every OEM. You need one?

 

[Bugman1400]

A MV fused disconnect switch in NEMA 3R? That is very common and made by about every OEM. You need one?

Looking for outdoor switch...no enclosure.

 

[templdl]

Contact EATON if you want an OEM open type MV fused load interrupter switch which started out as a Westinghouse WLI and appears to be now offered by EATON as a type MVS SWitch.

 

[Jraef]

Looking for outdoor switch...no enclosure.

Are you looking for a pole mounted primary cut-out switch? S&C, Cooper (now Eaton), AB Chance (now Hubbell Power Systems) are the big suppliers of those.

 

[Bugman1400]

Are you looking for a pole mounted primary cut-out switch? S&C, Cooper (now Eaton), AB Chance (now Hubbell Power Systems) are the big suppliers of those.

Could be pole-mounted but, gang-operated.

 

[Jraef]

Could be pole-mounted but, gang-operated.

Most of them offer that version, here's Hubbell's;
http://www.hubbellpowersystems.com/catalogs/switching/14AGang_Switches.pdf

Eaton's
http://www.cooperindustries.com/con...phase_switches/sidebuster-m-force-switch.html

S&C's
http://www.sandc.com/products/switching-overhead-distribution/omni-rupter.asp

You say "could be" but if you want MV and outdoor and open, it MUST be pole mounted to be even reasonably safe.

 

[Ingenieur]

Common
gang operated air break switch
http://www.inertiaworks.com/lineboss-15kv-35kv-sidebreak-goab-switch.html