Search:

Type: Posts; User: LarryFine

Page 1 of 8 1 2 3 4

Search: Search took 0.18 seconds.

  1. It sounds reasonable for your situation. It...

    It sounds reasonable for your situation. It certainly would be more efficient to do it at a workbench than in the field.
  2. Thread: Service Head

    by LarryFine
    Replies
    5$$
    Views
    109

    Make it so the upper window sash can not be...

    Make it so the upper window sash can not be lowered.
  3. Replies
    6$$
    Views
    206

    My one experience with it tells me it can not be...

    My one experience with it tells me it can not be unscrewed after several years outdoors.
  4. Replies
    7$$
    Views
    458

    Would that mean you also don't like using...

    Would that mean you also don't like using classified breakers?
  5. Replies
    20$$
    Views
    1,068

    I bet they'd see much more use if they had to be...

    I bet they'd see much more use if they had to be run to power the television. :p
  6. Replies
    15$$
    Views
    542

    Not for a constant-resistance load; the current...

    Not for a constant-resistance load; the current varies with the voltage. A motor, on the other hand, tends to be a constant-power load, and the current would increase as the voltage lowers.

    Now,...
  7. Replies
    31$$
    Views
    1,344

    Fight! Fight! :p

    Fight! Fight! :p
  8. Replies
    7$$
    Views
    236

    Using 14-2 MC will save you a lot of labor. ...

    Using 14-2 MC will save you a lot of labor.

    May I presume 120v then?
  9. Replies
    7$$
    Views
    236

    Are we talking 120v lighting or low-voltage? ...

    Are we talking 120v lighting or low-voltage?

    What are you considering putting in the 3/8"?
  10. Replies
    9$$
    Views
    522

    https://www.youtube.com/watch?v=NUC9FZ2GEfc

    https://www.youtube.com/watch?v=NUC9FZ2GEfc
  11. Replies
    11$$
    Views
    608

    The third pic is of a different panel, and I have...

    The third pic is of a different panel, and I have seen split-bus CH panels before.

    A split-bus panel takes advantage of the six-throws exception to a main breaker.

    Yes, they are as described,...
  12. Replies
    6$$
    Views
    415

    Maybe to make sure they're not accidentally...

    Maybe to make sure they're not accidentally bypassed, disconnected, or otherwise mis-wired while the control wiring is connected.
  13. Now imagine having a home inspector as a...

    Now imagine having a home inspector as a customer. :blink:
  14. Replies
    31$$
    Views
    882

    And it is not the service main disconnect.

    And it is not the service main disconnect.
  15. No, you can't "unbend" the 120 degrees into 180...

    No, you can't "unbend" the 120 degrees into 180 degrees that way. Since you need 120/240v with a neutral, you should use a 1ph 208-to-120/240v transformer, and bond the derived neutral.
  16. Replies
    31$$
    Views
    1,344

    Some may argue that it should be as large as the...

    Some may argue that it should be as large as the feeder neutral, but it really depends on the maximum unbalanced neutral current, partially controlled by how well you happen to do in selecting which...
  17. Replies
    31$$
    Views
    1,344

    Duke, it depends on how you mount and connect the...

    Duke, it depends on how you mount and connect the bar.

    Only grounds can land on a bar whose only connection to the neutral is through the metal of the enclosure. You can connect it to the neutral...
  18. Replies
    10$$
    Views
    403

    It sounds like they're saying that they gave you...

    It sounds like they're saying that they gave you a short-circuit-interrupting rating upgrade without charge, and are now recouping the cost of their mistake.
  19. Replies
    9$$
    Views
    549

    I'd be interested in the effect of temporarily...

    I'd be interested in the effect of temporarily connecting an incandescent bulb in parallel.
  20. I would tell them I'll install them for, say,...

    I would tell them I'll install them for, say, $100 each, plus whatever it takes to get the power to them from below, or suggest they call a finish carpenter to cut the openings.

    Depending on wood...
  21. Replies
    16$$
    Views
    730

    Read the exception again. Only line-to-neutral...

    Read the exception again. Only line-to-neutral loads unless protected by a breaker that assures simultaneous opening of all lines.
  22. Replies
    16$$
    Views
    730

    Now allowed.

    Now allowed.
  23. Replies
    4$$
    Views
    301

    Depend on the code in force at the time, but most...

    Depend on the code in force at the time, but most of those panels were limited to 40 circuits.
  24. Replies
    6$$
    Views
    285

    My larger local suppliers have an "inside sales"...

    My larger local suppliers have an "inside sales" department where the guys know the equipment, and you bypass the counter guys completely.
  25. Replies
    17$$
    Views
    1,096

    You should bill for the time and materials at a...

    You should bill for the time and materials at a premium rate, as well as for loss of profit on the remainder of the accepted contract.

    They would have to admit breach of contract to claim you...
Results 1 to 25 of 200
Page 1 of 8 1 2 3 4