pparana
Member
- Location
- Jacksonville Fl USA
We have a job that is a little out of my depth. I am hoping to get some help or a reference to hire someone to do the calculations. The client has a generator for a barge. They are trying to get 240 and 120 for a sub panel.
The power output is 480v Wye. There is one free 50A breaker they want to use as a feed to a connex that will house this panel. The run is about 50 feet. They would like a 15kv transformer. Since they are stepping down the power, and they have that 50ft run, I am unsure what I can give them on the other end. Also I am unsure if the 15kv transformer is going to be big enough for the application. As I said, I do not mind hiring someone to run the calculations, I am just getting a lot of different information from local vendors.
Thanks again,
Phil
The power output is 480v Wye. There is one free 50A breaker they want to use as a feed to a connex that will house this panel. The run is about 50 feet. They would like a 15kv transformer. Since they are stepping down the power, and they have that 50ft run, I am unsure what I can give them on the other end. Also I am unsure if the 15kv transformer is going to be big enough for the application. As I said, I do not mind hiring someone to run the calculations, I am just getting a lot of different information from local vendors.
Thanks again,
Phil