Work Pics

Status
Not open for further replies.

ronaldrc

Senior Member
Location
Tennessee
Nice work Jim.

Here are a few generators we installed awhile back.

The larger one in the top picture is a 4160 V 2250 KW, the others are 480 V 1000 KW's

The center is an existing 480 V 2000 KW that was relocated to be beside the new ones.

The bottom is two 480 V 1500 KW's about a 100 yards from the others.

Harrahs005_zps6ba79872.jpg



Harrahs022_zps3eadd7b5.jpg



Harrahs014_zpse5d5e870.jpg


Roger



Nice work Jennies and conduit.

Roger
I can't see them from my house
But, my guess would be a Medical complex.

Does the Larger one back the other three for a second back up?
 

roger

Moderator
Staff member
Location
Fl
Occupation
Retired Electrician
Casino? Im think data center :p

Nice work Jennies and conduit.

Roger
I can't see them from my house
But, my guess would be a Medical complex.

Does the Larger one back the other three for a second back up?

They are at a casino. (got keep those bet's rolling :roll:)

Ronald, the large one (2250KW 4160 V) is solely for a chiller.

Roger
 

ronaldrc

Senior Member
Location
Tennessee
They are at a casino. (got keep those bet's rolling :roll:)

Ronald, the large one (2250KW 4160 V) is solely for a chiller.

Roger

:Wow" I never would have thought that place was that big, been there a couple times.

They have expanded somewhat.

Can't see them from my house but can see them from Google Earth.

Ronald :)
 

Cletis

Senior Member
Location
OH
Very Very nice setup. A few questions. Why the stainless and rigid? What is that corner angle raceway (never seen one of those)? I only see 2 phases coming in top of left panel and 3 phases leaving (maybe optical illusion)? Why are panels overlapping the wood backboard ?

That's some high quality work right there
 

GoldDigger

Moderator
Staff member
Location
Placerville, CA, USA
Occupation
Retired PV System Designer
Very Very nice setup. A few questions. Why the stainless and rigid? What is that corner angle raceway (never seen one of those)? I only see 2 phases coming in top of left panel and 3 phases leaving (maybe optical illusion)? Why are panels overlapping the wood backboard ?

That's some high quality work right there
I see a suggestion of an incoming black to the left of the other two. Bad camera angle?
 

infinity

Moderator
Staff member
Location
New Jersey
Occupation
Journeyman Electrician
Nice work. Did the job specs call for RGS and hubs on the cabinets?

Very Very nice setup. A few questions. Why the stainless and rigid? What is that corner angle raceway (never seen one of those)? I only see 2 phases coming in top of left panel and 3 phases leaving (maybe optical illusion)? Why are panels overlapping the wood backboard ?

That's some high quality work right there

Thank you. :cool:

Yes those are stainless steel cabinets, I believe they were something like NEMA 6. The installation was in a commercial kitchen where they thought that there may be washing down from a hose hence the SS, the RMC and the hubs. The finished product had the conduits and the area between the panels boxed out and the entire area covered in tile that's why there's a combination of wonderboard and plywood. Overkill IMO but hey they paid for it. :D

The raceway connecting them together came from the manufacturer of the panels.
 
Status
Not open for further replies.
Top