User Tag List

Results 1 to 2 of 2

Thread: Inspector wanted neutrals in switch legs

  1. #1
    Join Date
    Nov 2018
    Location
    Nashville, TN
    Posts
    1
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Inspector wanted neutrals in switch legs

    I’m finishing out my basement adding lights and fans to the ceiling. At the rough in inspection, the inspector said I needed neutrals in my switch legs. This confused me, since the wires I pulled will have neutrals for each switch in the box.

    I drew up the schematic as the wires I pulled will be trimmed out. I ran it by a buddy who owns an electrician company, and he said it looks fine.

    I’d welcome insights from folks here. Am I missing something?

    The schematic does not show ground wires, and the 14/3 switch and wire can be ignored for this purpose since it was not at issue with the inspector.

    Sorry about the orientation being 90 degrees off.

    Name:  4715C00B-2B19-494D-A905-8260AA3FBAC9.jpg
Views: 184
Size:  7.4 KB

  2. #2
    Join Date
    Feb 2003
    Location
    Fl
    Posts
    17,558
    Mentioned
    1 Post(s)
    Tagged
    0 Thread(s)
    The article section you will need to read is 404.2(C), with that said, the forum rules do not allow us to answer "how to" or DIY questions so I must close this thread.

    This site is designed for:


    • Electrical Contractors
    • Electricians
    • Engineers
    • Inspectors
    • Instructors
    • Other electrically related individuals


    * This NEC� Forum is for those in the electrical and related industries. Questions of a "How-To" nature by persons not involved in the electrical industry will be removed without notice.
    Roger
    Moderator

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •