User Tag List

Results 1 to 2 of 2

Thread: 20A FSU

  1. #1
    Join Date
    Jul 2019
    Location
    Menlo Park, CA USA
    Posts
    1
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    20A FSU

    The fuse in my FSU at the furnace blew. I found in the furnace installation manual that it should have been a 20A fuse. The FSU is a typical unit with switch and screw in fuse. Although it will accept a larger fuse, the unit is only rated at 15A. I cannot find a version that will fit in the same single gang box that is 20A. Is anyone aware of one?
    Thanks,
    Ron

  2. #2
    Join Date
    Feb 2009
    Location
    Durango, CO, 10 h 20 min without traffic from winged horses.
    Posts
    10,116
    Mentioned
    1 Post(s)
    Tagged
    0 Thread(s)
    I am closing this thread, in accordance with the Forum rules. This Forum is intended to assist professional electricians, inspectors, engineers, and other members of the electrical industry in the performance of their job-related tasks. However, if you are not an electrician or an electrical contractor, then we are not permitted to help you perform your own electrical installation work.


    If I have misjudged the situation, if for example this project is related to your work, then send me a Private Message. If you can show me that I am wrong, and that you are a licensed electrician (or at least a licensed apprentice), then I will reopen your post, and offer an apology for the delay and inconvenience.
    If you don't think too good, don't think too much.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •