Alwayslearningelec
Senior Member
- Location
- NJ
- Occupation
- Estimator
If you were running PVC conduit duct banks what would determine whether you use 10' or 20' lengths? Thanks
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
10' vs 20' Lengths
- Thread starter Alwayslearningelec
- Start date
- Status
- Not open for further replies.
rc/retired
Senior Member
- Location
- Bellvue, Colorado
- Occupation
- Master Electrician/Inspector retired
Space?
Ron
Ron
Alwayslearningelec
Senior Member
- Location
- NJ
- Occupation
- Estimator
??Space?
Ron
AC\DC
Senior Member
- Location
- Florence,Oregon,Lane
- Occupation
- EC
What ever fits best I would use 20 all the time, if I don’t have to haul them
rc/retired
Senior Member
- Location
- Bellvue, Colorado
- Occupation
- Master Electrician/Inspector retired
Alwayslearningelec
Senior Member
- Location
- NJ
- Occupation
- Estimator
What do you mean fits best? The length of the trench?What ever fits best I would use 20 all the time, if I don’t have to haul them
What's the advantage of using 20' lengths?
What do you mean fits best? The length of the trench?
What's the advantage of using 20' lengths?
Fewer joints to makeup.
letgomywago
Senior Member
- Location
- Washington state and Oregon coast
- Occupation
- residential electrician
If it was stocked more I'd be happy to almost always get a 20ft length of 2 inch rigid when doing service changes then I wouldn't need to worry about threading a 3 ft chunk ever.
- Status
- Not open for further replies.