JOHNEO99
Senior Member
- Location
- Northern Illinois
Any of you guys know where to get a price for these online?
100 amp Mast Kits
- Thread starter JOHNEO99
- Start date
- Status
- Location
- New Jersey
- Occupation
- Journeyman Electrician
What's is a 100 amp mast kit?
JOHNEO99
Senior Member
- Location
- Northern Illinois
LOL I Know
None of the suppliers carry them around here any more.
2-backs and straps for 2" IMC
1-2" offset hub for 2" riser/mast
1- 2" service drop attachment with porcelain insulator
1- 2" weatherhead
1- 2' rubber boot for through roof installation
None of the suppliers carry them around here any more.
2-backs and straps for 2" IMC
1-2" offset hub for 2" riser/mast
1- 2" service drop attachment with porcelain insulator
1- 2" weatherhead
1- 2' rubber boot for through roof installation
1793
Senior Member
- Location
- Louisville, Kentucky
- Occupation
- Inspector
TOOL_5150
Senior Member
- Location
- bay area, ca
Why would you want to use 2" for a 100 amp service?
~Matt
~Matt
stickboy1375
Senior Member
- Location
- Litchfield, CT
Because its a mast service, and most POCO's require a minimum 2" rigid conduit. :smile:
Only if you're using the conduit to support the service drop (triplex). If you're using an eyebolt attached to the house, then you can use EMT, PVC or anything else that's allowed.
JOHNEO99
Senior Member
- Location
- Northern Illinois
This^^
Actually i was just reading they want 2 1/2" for 100A or smaller.
I need 1/2" bolts w/ clamps for 2 1/2" pipe for strapping riser to the wall...anyone know the trade name for these???
Minnies ?
AKA CONDUIT HANGER, COWBOY, MAE WEST, MINERALLAC?, Standard Conduit Hanger, Stand Off Strap (SOS)
Last edited:
JOHNEO99
Senior Member
- Location
- Northern Illinois
JOHNEO99
Senior Member
- Location
- Northern Illinois
Last edited:
Mr.Sparkle
Senior Member
- Location
- Jersey Shore
480 I have noticed through my endless nights of searching for information on these forums that you are quite possibly the king of posting properly sized well diagrammed examples of exactly what things people are trying to convey in their post.
JOHNEO99
Senior Member
- Location
- Northern Illinois
no no, the clamps in pdf that attach pipe to the wall not the service attatchment clamp
Holy Mother McKree!!!!.... they want the straps to go through the wall?!?!?!
Never seen anything like that! How far does the drop go....2 miles?
My guess is if the local POCO requires them, the local supply houses will stock them.
Interesting drawing..... what happens when the house has a 3' soffit? And you don't need flashing?
Last edited:
JOHNEO99
Senior Member
- Location
- Northern Illinois
Ya they are sticklers...drop aint very far,like 50'
The boot for the roof provides flashing.
Did you see the 2x4's between the rafters?
It makes for a pain in the arse if not new construction.
- Location
- Massachusetts
It would not be a mast then would it?
ramsy
Roger Ruhle dba NoFixNoPay
- Location
- LA basin, CA
- Occupation
- Service Electrician 2020 NEC
The service-drop procedure published by Exeloncop references no authority, codes, or standards. The PDF illustration on pp. 22/23 #6 should not be mandatory unless your approved plans, or AHJ requires it.
1793
Senior Member
- Location
- Louisville, Kentucky
- Occupation
- Inspector
We are required to follow the following:
LG&E Handbook
Look at pages 89 & 90. Look at the notes on page 90. #1 in particular.
LG&E Handbook
Look at pages 89 & 90. Look at the notes on page 90. #1 in particular.
Last edited:
- Status