120/208 commercial oven

[beansmcgee]

Noob here...... I have a commercial convection oven to wire that lists on the tag that the oven runs 60amp 3 phase, 120/208. I have a Fed Pioneer 3 phase panel (stablock) with lots of space left. Question is this..... Can I use a 3 pole breaker (60amp) that is listed as 240v or do I need to use a breaker that lists both 120 and 240? Stablok is getting hard to source so it would be great if I could use the 240v I already have.

Thanks for any help

 

[Dennis Alwon]

This site is designed for:

• Contractors
• Electricians
• Engineers
• Inspectors
• Instructors
• Other electrically related individuals

This NEC® Forum is for those in the electrical and related industries. Questions of a "How-To" nature by persons not involved in the electrical industry will be removed without notice.

Knowledge and the practical application of the National Electrical Code is an essential part of all electrical installations. If it's important for you to understand the National Electrical Code, then look no further.

To better help us serve you, please be sure to update your account details with your occupation field and location if you have not done so already. You can access your account details by clicking on your account name at the top right of the page when on the forums.