2 electric baseboards, one LV thermostat

[rangerbert]

Hey all,

I'm doing a remodel on my home, and I have two 8ft electric baseboard heaters, that are each on their own 15 amp circuit and are controlled by a single low-voltage thermostat. During the remodel, I've managed to lose the relay that was used for this. Now I'm trying to figure out what it is I need to purchase to replace the setup. Can anybody steer me in the right direction? My brother suggested a RIB, but I can't seem to figure out exactly which one would be correct.

For context
- There is one baseboard in the ktichen and one in the living room. It is open concept, so each heater getting it's own t-stat isn't the direction we want to go (not to mention the extra work required to fish wires into walls that we aren't planning to touch).
- the t-stat is a Honeywell TH8110U1003

Thanks!

 

[jumper]

I am closing this thread, in accordance with the Forum rules. This Forum is intended to assist professional electricians, inspectors, engineers, and other members of the electrical industry in the performance of their job-related tasks. However, if you are not an electrician or an electrical contractor, then we are not permitted to help you perform your own electrical installation work.


If I have misjudged the situation, if for example this project is related to your work, then send me a Private Message. If you can show me that I am wrong, and that you are a licensed electrician (or at least a licensed apprentice), then I will reopen your post, and offer an apology for the delay and inconvenience.

A reminder to all members, if you see a questionable post, feel free to report it by clicking the

button at the bottom left corner of the post.