ShortCircuited140
Member
- Location
- California
- Occupation
- Electrical Engineer
Hi, I have a set of ABB F202 A-25/0.03 RCDs and have them wired to L7-15 outlets for 277V circuits that I use. What tool would you recommend to periodically test these to ensure they are still tripping on time? I have looked at the fluke 1662, but looking at the datasheet the test voltage for the RCD trip time measurements needs to be between 100-265VAC. Any recommendations would be appreciated.
I rather not have to open the enclosure to push the 'test' button on the RCD themselves, but perform this test on the outlets.
I rather not have to open the enclosure to push the 'test' button on the RCD themselves, but perform this test on the outlets.