greenrover1
Member
- Location
- Venice
Is it permissible in NEC to utilize SJOOW type cable with 300V rated insulation for 3 phase 208 power ?
Thanks,
Ron
:?
Thanks,
Ron
:?
300 V insulation
- Thread starter greenrover1
- Start date
- Status
greenrover1
Member
- Location
- Venice
Glad to hear that!!
Glad to hear that!!
Thanks a lot Roger,
I have so much of it previously installed in an industrial environment and I was almost certain that it would have to be 600V rated.:happyyes:
Glad to hear that!!
Thanks a lot Roger,
I have so much of it previously installed in an industrial environment and I was almost certain that it would have to be 600V rated.:happyyes:
kwired
Electron manager
- Location
- NE Nebraska
- Occupation
- EC
Unless they changed something, last I knew 208 was less than 300 don't second guess yourself, you probably knew that also
greenrover1
Member
- Location
- Venice
Do the math right?
Do the math right?
Very often in the world of well established materials science the correct answer is just not as obvious as it would seem, electrical code issues are a minor part of my responsibilities that's why I asked the question. I have seen so many horror stories on large scale projects where someone just didn't read the directions or ask a seemingly unimportant question, it actually get's comical to look back on these episodes, but especially the responses to correcting the issue's were even funnier! Always ask that is my policy.
Do the math right?
Very often in the world of well established materials science the correct answer is just not as obvious as it would seem, electrical code issues are a minor part of my responsibilities that's why I asked the question. I have seen so many horror stories on large scale projects where someone just didn't read the directions or ask a seemingly unimportant question, it actually get's comical to look back on these episodes, but especially the responses to correcting the issue's were even funnier! Always ask that is my policy.
- Status