• We will be performing upgrades on the forums and server over the weekend. The forums may be unavailable multiple times for up to an hour each. Thank you for your patience and understanding as we work to make the forums even better.

30Hz v 60Hz

Status
Not open for further replies.
G

garlicguy

Member
Location
Virginia
Occupation
Retired
I’ve recently purchased a used 75kW genny, (LP fed 318cid Dodge V8 powered) WinCo (c. 1983).

It’s 60Hz at 3600 rpm.

Can I dial it back to 1800 rpm (for my residence w/no real large amp needs).

V/R
MAJ US Army (ret)
 
Little Bill

Little Bill

Moderator
Staff member
Location
Tennessee NEC:2017
Occupation
Semi-Retired Electrician
I am closing this thread, in accordance with the Forum Rules.

This site is designed for:

  • Electrical Contractors
  • Electricians
  • Engineers
  • Inspectors
  • Instructors
* This NEC Forum is for those in the electrical and related industries. Questions of a "How-To" nature by persons not involved in the electrical industry will be removed without notice.
Reminder to all members, if you see a questionable post, feel free to report it by clicking "Report" at the bottom left corner of the post.
 
Status
Not open for further replies.
Top