First time DIYer installing a Tesla wall connector in the driveway using 3/4" PVC in 18" deep trench. I didn't want to come up through the concrete base of the 4x4 and our ca1800 home has a rock foundation so I used two 45s at both locations. Unfortunately this put me over the 360° bend limit and the inspector failed the setup. I should be able to install a 2-gang pull box another 4x4 near the halfway point and come up with two 90° bends, right? At this point would I pull the conductors through and then bend back down 180° or should I splice them together somehow? 3x6# SW Simpull. My electrician was charging 3x markup on 6/3 Romex and making a big deal out of providing materials at cost, so I figured I should be able to figure this out myself. Thanks!
314.29 pull box questions
- Thread starter aisid
- Start date
- Status
- Occupation
- Licensed Electrician
I am closing this thread, in accordance with the Forum’s rules.
This site is designed for:
Contractors
Electricians
Engineers
Inspectors
Instructors
Other electrically related individuals
This NEC Forum is for those in the electrical and related industries.
Forum rules prohibit us from assisting a person to perform or assist others to do electrical work who are not qualified. The reason is that the forum’s owner does not want a person to get an answer to the question they asked, but not get answers to the other questions they should have asked and were unaware they needed to ask. Mike Holt Enterprises and the Moderators of this Forum do not wish to place you in danger by allowing others to give you too little information to ensure that the installation is safe.
This site is designed for:
Contractors
Electricians
Engineers
Inspectors
Instructors
Other electrically related individuals
This NEC Forum is for those in the electrical and related industries.
Forum rules prohibit us from assisting a person to perform or assist others to do electrical work who are not qualified. The reason is that the forum’s owner does not want a person to get an answer to the question they asked, but not get answers to the other questions they should have asked and were unaware they needed to ask. Mike Holt Enterprises and the Moderators of this Forum do not wish to place you in danger by allowing others to give you too little information to ensure that the installation is safe.
- Status