400 Amp Install

Status
Not open for further replies.

ARIBOB

New member
Folks,

Installing 400 Amp Meter Base On A Pedastel, 300 Ft From Residence. Need A Couple 110 Volt Circuits Near The Meter Base. Plan On Pulling To A 200 Amp Panel And A 100 Amp Panel In The Residence. I Know The 200/100 Part Well, But What Part #'s Can I Use For The Meter Base (one That Has A Few Breaker Slots In It)?
Any Suggestions?
Thx In Advance.
Bob
 
sorry - no DIY

sorry - no DIY

Quote from Satcom: "What meter did the utility approve for the job?"

In most areas, this is the key. There is an acceptable list or standard for meter cans from the utility company.

It sounds like you are a Do -It-Yourselfer "DIY", so please get the professional services/guidance that you should have for this installation. Unfortunately, it is not possible to know all of the details of your installation (nor local regulations) to address them properly in this type of forum, so one of the foundational rules is that this is not intended to be a forum for advice to DIYs.

Sorry we can not provide that service to you- please seek professional advice/installation for the sake of safety.
 
Status
Not open for further replies.
Top