JJWalecka
Senior Member
- Location
- New England
Pardon my ignorance.
Hypothetical speaking.
In an industrial environment, 575 volts supplies a disconnect. A volt meter reads 575ish between all three phases. Two of the three phases read 600+volts to ground and one phase measures 75volts. Why is that?
I?m a researching on my own but feedback is welcome.
Is 575 conceived through a 3 wire delta?
Hypothetical speaking.
In an industrial environment, 575 volts supplies a disconnect. A volt meter reads 575ish between all three phases. Two of the three phases read 600+volts to ground and one phase measures 75volts. Why is that?
I?m a researching on my own but feedback is welcome.
Is 575 conceived through a 3 wire delta?