I want to feed three buildings with one 320 amp service. The meter panel will be moved to a well shed in between the house and the shop. The house uses less than 100 amps at any given time, the shop will be somewhere around 100-120 amps at most and the well shed should be under 80 amps. What is the best way to distribute power to all three buildings?
Advice needed to feed 3 buildings from 1
- Thread starter Jdz
- Start date
- Status
- Location
- Chapel Hill, NC
- Occupation
- Retired Electrical Contractor
I am closing this thread, in accordance with the Forum rules. This Forum is intended to assist professional electricians, inspectors, engineers, and other members of the electrical industry in the performance of their job-related tasks. However, if you are not an electrician or an electrical contractor, then we are not permitted to help you perform your own electrical installation work.
If I have misjudged the situation, if for example this project is related to your work, then send me a Private Message. If you can show me that I am wrong, and that you are a licensed electrician (or at least a licensed apprentice), then I will reopen your post, and offer an apology for the delay and inconvenience.
A reminder to all members, if you see a questionable post, feel free to report it by clicking the
button at the bottom left corner of the post.
If I have misjudged the situation, if for example this project is related to your work, then send me a Private Message. If you can show me that I am wrong, and that you are a licensed electrician (or at least a licensed apprentice), then I will reopen your post, and offer an apology for the delay and inconvenience.
A reminder to all members, if you see a questionable post, feel free to report it by clicking the
- Status