Afci and knob and tube

[Doodlerose]

I am working on older home with two separate knob and tube circuits left. Both have 2 outlets and a light fixture, totally apart and on two GE 20amp single pole breakers. I want to replace with 2 15 amp GE dual function breakers for 14 wire on light fixtures, outlets have 12 but should be fine. Each circuit is totally isolated from the other. Will this be code compliant? Thanks.

 

[ActionDave]

I am closing this thread, in accordance with the Forum’s rules.

This site is designed for:

Contractors
Electricians
Engineers
Inspectors
Instructors
Other electrically related individuals
This NEC Forum is for those in the electrical and related industries.

Forum rules prohibit us from assisting a person to perform or assist others to do electrical work who are not qualified. The reason is that the forum’s owner does not want a person to get an answer to the question they asked, but not get answers to the other questions they should have asked and were unaware they needed to ask. Mike Holt Enterprises and the Moderators of this Forum do not wish to place you and your family in danger, by allowing others to give you too little information to ensure that the installation is safe.