EVPhil
New User
- Location
- Massachusetts
- Occupation
- Electrical Contractor
What is the minimum distance between a 500 gal propane dispensing tank and a NEMA 3R Switchboard 480 volt
Allowable Distance
- Thread starter EVPhil
- Start date
- Status
kwired
Electron manager
- Location
- NE Nebraska
- Occupation
- EC
No distance at top of my mind but pretty certain any classified location will be based off of the "dispensing area" and not the tank itself.
Any automatic relief valves are also likely to have a classified location around them.
Any automatic relief valves are also likely to have a classified location around them.
- Location
- Mission Viejo, CA
- Occupation
- Professional Electrical Engineer
The tank is covered in Section/Table 514.3 and possibly Section/Table 515.3 depending on the application.
BTW the panel voltage is irrelevant for a power application. The enclosure Type may be, depending on its location.
BTW the panel voltage is irrelevant for a power application. The enclosure Type may be, depending on its location.
Last edited:
- Status