E edukey New member Feb 9, 2011 #1 Hi I have Amprobe AMB-45 that when I measure a 1K resistor is measured 1.6k and gather tips measured 0.7 to 0.8ohm someone will know if you have any calibration to be measured correctly
Hi I have Amprobe AMB-45 that when I measure a 1K resistor is measured 1.6k and gather tips measured 0.7 to 0.8ohm someone will know if you have any calibration to be measured correctly
G G._S._Ohm Senior Member Location DC area Feb 9, 2011 #2 The listed accuracy for your meter on the resistance scale is 1% so you should check your meter against resistors of different values that are 0.1% or better. See below. http://www.google.com/search?client=safari&rls=en&q=precision+resistors&ie=UTF-8&oe=UTF-8 They may cost you but their service life will be almost unlimited.
The listed accuracy for your meter on the resistance scale is 1% so you should check your meter against resistors of different values that are 0.1% or better. See below. http://www.google.com/search?client=safari&rls=en&q=precision+resistors&ie=UTF-8&oe=UTF-8 They may cost you but their service life will be almost unlimited.
