Anyone know any easy ways to install beam clamps over grid?

[LouisianaApprentice]

I was wondering if i could beat the end of a piece of emt into the size of the square fastener and drill a hole in the pipe to put a rod through to make a t handle then tighten them that way? If not what works best 8 point socket, the klein 4 point ratchet wrench or channel locks

 

[Little Bill]

What's your application? I'm not seeing why beam clamps would be needed on a ceiling grid, if that's what you are talking about.

 

[Knuckle Dragger]

Caddy make a spring steele beam clamp. That might help in your application.
You just press it on or tap it on the beam.

 

[readydave8]

What's your application? I'm not seeing why beam clamps would be needed on a ceiling grid, if that's what you are talking about.

I think he's trying to hang rod from structural beams above drop ceiling, not to the grid but above it?

 

[LouisianaApprentice]

Yes sorry we are hanging racks to beams above existing drop in cieling and theres no room to get up there and we are running 2" emt