John120/240
Senior Member
- Location
- Olathe, Kansas
Situation; the house is wired with 120V smoke alarms w/ battery backup. On a
standard breaker. Permit was pulled to finish the basement. Basement bedroom
to be arc fault protected. So install the basement smoke on the arc fault &
interconnect to the other smokes with one conductor of 14-2. Make sure the old
smokes & the new smokes are all on the same phase. Does this sound right??
standard breaker. Permit was pulled to finish the basement. Basement bedroom
to be arc fault protected. So install the basement smoke on the arc fault &
interconnect to the other smokes with one conductor of 14-2. Make sure the old
smokes & the new smokes are all on the same phase. Does this sound right??