steelandfeels
New User
- Location
- California
- Occupation
- Fabricator
Hey all,
I currently have a Q Cell Hyb G1 inverter with 19kwh of storage.
There are two power outputs for the inverter.
1. Grid tied
2. Backup load.
The installation requires backup loads be sent to a dedicated breaker panel to power all of your deemed essential loads.
I have deemed ALL of my loads essential and need to transfer backup power to existing sub panel during outages.
My research has brought me to finding a "Smart" ATS that does not rely on a controller in the generator to switch over. This should be a 2 wire start system.
What brands/ models would work with this 100 amp application?
Trying to get this done for under $1000.
I currently have a Q Cell Hyb G1 inverter with 19kwh of storage.
There are two power outputs for the inverter.
1. Grid tied
2. Backup load.
The installation requires backup loads be sent to a dedicated breaker panel to power all of your deemed essential loads.
I have deemed ALL of my loads essential and need to transfer backup power to existing sub panel during outages.
My research has brought me to finding a "Smart" ATS that does not rely on a controller in the generator to switch over. This should be a 2 wire start system.
What brands/ models would work with this 100 amp application?
Trying to get this done for under $1000.
