I have a main power meter panel which has breakers hard bussed to the 200 amp breaker. Then my main power feeds into the house from the same buss lugs to a 200 amp load center. Can I still hook up an ATS with this set up and if so how, I still need to feed the breakers below the meter when in generator mode, all the set ups I have seen would bypass feeding these breakers any advice would be appreciated. I do have pics of the current set up if needed.
Automatic Transfer Switch
- Thread starter JimmyMc
- Start date
- Status
- Location
- Bremerton, Washington
- Occupation
- Master Electrician
Forum rules prevent us from assisting DIYers
- Status