ptonsparky
Tom
- Occupation
- EC - retired
Basic class 100
- Thread starter ptonsparky
- Start date
- Status
- Location
- Tennessee NEC:2017
- Occupation
- Semi-Retired Electrician
Is there a question in this? Or am I missing something in the pics?
LarryFine
Master Electrician Electric Contractor Richmond VA
- Location
- Henrico County, VA
- Occupation
- Electrical Contractor
Handle down, blades engaged.
hbiss
EC, Westchester, New York NEC: 2014
- Location
- Hawthorne, New York NEC: 2014
- Occupation
- EC
Or are you asking about the arc chutes at the top?
-Hal
-Hal
ptonsparky
Tom
- Occupation
- EC - retired
Basic troubleshoot class but maybe should be in Safety
I was there to investigate the failed fan.
The disconnect handle operated with a nice loud snap.
A reminder to look and verify.
I was there to investigate the failed fan.
The disconnect handle operated with a nice loud snap.
A reminder to look and verify.
Davebones
Senior Member
- Location
- North Of Tampa Fl
Have had a Journeyman working for me off and on for the last 6 years . One of the best habits I got him to do is verify no power no matter what switch , breaker, disconnect or what ever you've done to shut off power you still test to verify there is " No Power "
hillbilly1
Senior Member
- Location
- North Georgia mountains
- Occupation
- Owner/electrical contractor
We got this a couple of weeks ago from Square D.
hillbilly1
Senior Member
- Location
- North Georgia mountains
- Occupation
- Owner/electrical contractor
Well, attached the correct link, but it appears to go to home page instead.
https://www.se.com/us/en/brands/squared/safety-notices/2018/general-duty-safety-switch/
https://www.se.com/us/en/brands/squared/safety-notices/2018/general-duty-safety-switch/
- Status