Blank cover for 3/4" conduit

[Alwayslearningelec]

So if I have a pendant mounted ceiling device using 3/4" conduit( RMC or EMT) and need a blank cover for the conduit to enter into to what covers exist that would have a hole for either threaded conduit or a compression connector? 4-11/16" box. Thanks

 

[infinity]

I would use a swivel cover.

Topaz SC-507511B :: 4-11/16" Square Swivel Fixture, Diameter: 1/2 and 3/4", Steel :: Rexel USA

4-11/16 Inch Square Swivel Fixture, Diameter: 1/2 and 3/4 Inch, Support: 50 LBS., Steel, Cat #: SC-507511B, Mfr: Topaz

www.rexelusa.com

 

[don_resqcapt19]

Swivel covers are common. They have threaded openings. I would not consider the use of EMT or any compression or set screw type connector for this type of application,

 

[Alwayslearningelec]

Swivel covers are common. They have threaded openings. I would not consider the use of EMT or any compression or set screw type connector for this type of application,

Thanks.