Boat lift motors

Status
Not open for further replies.
K

Kookieman

New User
Location
Woodbridge,va
Occupation
retired
hello, I have a dock with 2 boat lift motors that pull approximately 12/13 amps each they are 120 volt. my 100 amp box is 150 ft on the shore i need to know if a single pole 30 gfci is OK to run 10/2 wire to a 20 AMP receptacle, Thanks for your time, MIKE. PS MOTORS HAVE SEPARATE PLUGS
 
I am closing this thread, in accordance with the Forum Rules.
This site is designed for:
  • Contractors
  • Electricians
  • Engineers
  • Inspectors
  • Instructors
  • Other electrically related individuals
* This NEC Forum is for those in the electrical and related industries. Questions of a "How-To" nature by persons not involved in the electrical industry will be removed without notice.
Click to expand...
If you feel this action to be in error, feel free to contact me via PM to explain. Reminder to all members, if you see a questionable post, feel free to report it by clicking "Report" at the bottom left corner of the post.
 
Status
Not open for further replies.
Top