• We will be performing upgrades on the forums and server over the weekend. The forums may be unavailable multiple times for up to an hour each. Thank you for your patience and understanding as we work to make the forums even better.

Bonding Inground Pool

Merry Christmas
Status
Not open for further replies.

dboock

New member
I just started a new Inground swimming pool install. I have read up in the NEC the bonding requirements. I know WHAT I have to do to meet these requirements. I just don't know HOW to bond at all of the required locations or what is the best way to do this. Thanks! Dan
 

ryan_618

Senior Member
Re: Bonding Inground Pool

Perhaps I'm not reading your post right, but it sounds to me like this is an answer. The code considers the rebar "mat" or "cage" as a bonding grid. All of your rebar should already be tied together, so with that in mind somply connect a number 8 solid to the rebar with a Ufer clamp and hit your lights, ladder, cover, moter...whatever. Most people that I see installing pools will have about 10 of these small bonding jumpers all over the place. Hope that helps. :)
 
Status
Not open for further replies.
Top