Dave Holm
New member
- Location
- Ramona, CA
Is it acceptable to bond steel sealtight connectors according to OSHPD?
Bonding of steel sealtight connectors
- Thread starter Dave Holm
- Start date
- Status
Gregg Harris
Senior Member
- Location
- Virginia
- Occupation
- Electrical,HVAC, Technical Trainer
Is this what you are looking for?
350.60 Grounding and Bonding. If used to connect equipment where flexibility is necessary to minimize the transmission of vibration from equipment or to provide flexibility for equipment that requires movement after installation, an equipment grounding conductor shall be installed.
Where flexibility is not required after installation, LFMC shall be permitted to be used as an equipment grounding conductor when installed in accordance with 250.118(6).
Where required or installed, equipment grounding conductors shall be installed in accordance with 250.134(B).
Where required or installed, equipment bonding jumpers shall be installed in accordance with 250.102.
- Location
- New Jersey
- Occupation
- Journeyman Electrician
OSHPD?
Gregg Harris
Senior Member
- Location
- Virginia
- Occupation
- Electrical,HVAC, Technical Trainer
Here is a WAG since he is in CA. Office of Statewide Health Planning Development. Looks like construction projects for health care.
Correct, it is usually pronounced as Osh Pod.
- Status