Bonding permanently installed swimming pools AKA above ground swimming pools

[Asbury1]

We have recently installed electrical systems for a few above ground swimming pools. We are coming across some that have 4-#8 bare copper ground pigtails for meeting the bonding requirements. In this case, can we use split bolts to bond the 4 points of the pool or must we use irreversible crimps?

 

[ActionDave]

You can use split bolts.

680.26(B)

 

[Little Bill]

If we can't use split bolts I'm in trouble a 1000 times over!

 

[mopowr steve]

May have to check if your split bolts are listed for direct burial if it is the case in your situation having them buried.