Bonding pipe that has a camara and a dish for wireless signal on it

Status
Not open for further replies.

JdoubleU

Senior Member
Do I need to bond this metal pipe that runs up through the roof. It has a camara that is powered by power over ethernet and a dish for wireless signal on it.
 
Do I need to bond this metal pipe that runs up through the roof. It has a camara that is powered by power over ethernet and a dish for wireless signal on it.



810.1 Scope. This article covers antenna systems for radio
and television receiving equipment, amateur and citizen band
radio transmitting and receiving equipment, and certain features
of transmitter safety. This article covers antennas such as
wire-strung type, multi-element, vertical rod, and dish and also
covers the wiring and cabling that connects them to equipment.
This article does not cover equipment and antennas used
for coupling carrier current to power line conductors.

810.15 Grounding. Masts and metal structures supporting
antennas shall be grounded in accordance with 810.21.

I would suggest the pipe is a mast.

But, I am by no means an expert on such things.
 
Status
Not open for further replies.
Top