Box Securing

[mstrlucky74]

The way the box is shown in this pic would always need aT-bar hanger to hold the box in place? How else could this box be secured?

 

[Ponchik]

The box can be attached to the structure ceiling above the "T"bar.

The way it is attached (as pictured) the lower ceiling HAS to be T bar. If it is hard lid ceiling then the box is not accessible.

 

[kwired]

The way the box is shown in this pic would always need aT-bar hanger to hold the box in place? How else could this box be secured?

There is no limits to the number of ways one could secrue it, but T-bar hanger is simplest and labor cost effective. It may only take 30 seconds to a minute to attach the box to the hanger and the hanger to the T-bars, but may take several minutes to fabricate most anything else. So a job where you will install several of them you likely plan ahead and have the T-bar hangers available. For an application where you sort of unexpectedly need to hang something in this ceiling - may still cost less to fabricate something with what is available then to run after a T bar hanger.

 

[mstrlucky74]

Thanks!