Breaker Panel Question

[joeblack1951]

I have a 200 amp main breaker panel in my utility room that has 2/0 THNN copper stranded line in and would like to run 2/0 from the line in side of that panel to the additional panel 80 feet away in my shop. The problem is that I can't get two pieces of 2/0 THNN copper stranded on each line in terminals. Is there a dual lug that I can install on each of the line in and then attach the lug to the breaker panel terminal??

thanks for the help

Joe

 

[Dennis Alwon]

I am closing this thread, in accordance with the Forum Rules.

This site is designed for:

• Contractors
• Electricians
• Engineers
• Inspectors
• Instructors
• Other electrically related individuals

* This NEC Forum is for those in the electrical and related industries. Questions of a "How-To" nature by persons not involved in the electrical industry will be removed without notice.

If you feel this action to be in error, feel free to contact me via PM to explain. Reminder to all members, if you see a questionable post, feel free to report it by clicking "Report" at the bottom left corner of the post.