Bulldog Switchboard

[stevdan]

Hey Guys,
I HAVE A LOAD BOARD BULLDOG VACCU BREAK COMPACT SWITCH BOARD.
I am trying to change some circuits breakers so the load board can have more loads.
Do they still make the followings, if not is there any compatible ( same width ) I am trying to see if I can put 70A or 40A.
Thank you

VS7406LMR		100	600	3	SINGLE
VS7604LMR		200	600	3	SINGLE

 

[Jraef]

Hey Guys,
I HAVE A LOAD BOARD BULLDOG VACCU BREAK COMPACT SWITCH BOARD.
I am trying to change some circuits breakers so the load board can have more loads.
Do they still make the followings, if not is there any compatible ( same width ) I am trying to see if I can put 70A or 40A.
Thank you

VS7406LMR		100	600	3	SINGLE
VS7604LMR		200	600	3	SINGLE

Vacu-break were fused disconnects, not breakers. Bulldog became ITE in the 60s, which became Siemens in the 70s. Siemens still uses the term "Vacu Break" in their VBII switches, they may still be capable of retrofitting into old Bulldog boards. The basic switch design hasn't changed much in the 50+ years since Bulldog went away.