Busway Plug-Ins and MC Cable

[faresos]

Hello everyone;

I have a question with regards running MC cable from a busway plug-in units above the ceiling to a junction box (above the ceiling as well) powering power pole, is there any issue with this installation? also, is it ok to run MC cable in the power pole it self? I don't see an issue my self but would like to confirm. The MC cable will be used to power receptacles in the power pole. Thanks in advance

 

[petersonra]

MC is a chapter 3 recognized wiring method. It can be used where article 330 says it can be used.

 

[MyCleveland]

Hello everyone;

I have a question with regards running MC cable from a busway plug-in units above the ceiling to a junction box (above the ceiling as well) powering power pole, is there any issue with this installation? also, is it ok to run MC cable in the power pole it self? I don't see an issue my self but would like to confirm. The MC cable will be used to power receptacles in the power pole. Thanks in advance

Take a look at NEC 368.10 (1) & (2). Are you good to go ?

 

[faresos]

Thank you for the replies. I didn't believe there is an issue using MC cable with plug-in units for branch circuits but I thought to double check if someone has any issues with anything.

thanks again!