Ceiling Fan Help

[Catldavis]

Not sure why, but I'm locking-up on how to wire a ceiling fan with the fan and oscillation feature. It's a Bentley II from Home Depot. There's a video that shows that the switch needs a hot and ground and then two travelers (they show red and black) to the ceiling box. The ceiling box needs a neutral and and ground and the two travelers from the switch. For the life of me I can't figure out how to convert that configuration to Romex. Should I pull 12/3 from the switch to the ceiling box and 12/2 to the switch? Also, where does the neutral in the ceiling box terminate? Here are some images that I clipped from the video that might make it easier to understand:

https://photos.app.goo.gl/AWjQQ3GZJ9fx2dSs6


https://photos.app.goo.gl/AaahJusRJyfnDEaTA

Any help would be greatly appreciated.

 

[Dennis Alwon]

I am closing this thread, in accordance with the Forum Rules.

This site is designed for:

• Contractors
• Electricians
• Engineers
• Inspectors
• Instructors
• Other electrically related individuals

* This NEC Forum is for those in the electrical and related industries. Questions of a "How-To" nature by persons not involved in the electrical industry will be removed without notice.

If you feel this action to be in error, feel free to contact me via PM to explain.eminder to all members, if you see a questionable post, feel free to report it by clicking the

button at the bottom left corner of the post.