- Location
- Bremerton, Washington
- Occupation
- Master Electrician
I am looking for a mfg of a pvc saw thats similar to a chain with handles....
Chain type PVC Saw
- Thread starter tom baker
- Start date
- Status
macmikeman
Senior Member
- Location
- Planet macmikeman
I'm just looking for mine. Lost it on a job someplace. Two handles and piano wire not chain. I think I got it from Arlington but I'm not positive of that.
eric9822
Senior Member
- Location
- Camarillo, CA
- Occupation
- Electrical and Instrumentation Tech
rt66electric
Senior Member
- Location
- Oklahoma
Use masons string line
Use masons string line
I have had good luck by using simple mason's stringline or nylon sting. I cut apiece off and use screwdrivers or such for handles and saw away. Perfect for cutting pipe in a ditch.
Use masons string line
I have had good luck by using simple mason's stringline or nylon sting. I cut apiece off and use screwdrivers or such for handles and saw away. Perfect for cutting pipe in a ditch.
- Location
- Bremerton, Washington
- Occupation
- Master Electrician
Yes thats it from General. I have also heard about using string we may try that.
RETRAINDAILY
Senior Member
- Location
- PHX, arizona
There is one with a chain, but it is in the lawn and garden dept.
The string works BUT, some strings don't work, and if it is a 4" have the sawzall or hack saw ready, so you can just cut the top half if need be.
That mason line works some times like butter other times it binds up and breaks every other stroke
But I have broken the rope-saw too:roll:
The string works BUT, some strings don't work, and if it is a 4" have the sawzall or hack saw ready, so you can just cut the top half if need be.
That mason line works some times like butter other times it binds up and breaks every other stroke
But I have broken the rope-saw too:roll:
- Status