Champion Fiberglass Elbow for PVC

[anbm]

In lieu of PVC coated elbow, there is fiberglass elbow out there offered by Champion, has
anyone used it? Is it U.L. listed and Code compliance? Thank you!

 

[ptonsparky]

In lieu of PVC coated elbow, there is fiberglass elbow out there offered by Champion, has
anyone used it? Is it U.L. listed and Code compliance? Thank you!

We use fiberglass on occasion. Comparerativley Expensive. No burn through of rope on longer runs.. Use cable if possible . You do not want that experience.

 

[tom baker]

I have used FG once before. Super easy to pull thru. I wanted to try it like you do
But, it uses epoxy on fittings/couplings. slow to dry, not like glue and go for PVC. And need special gun for epoxy, and different of epoxy depending on air temp.
My recommendation? Use long sweep els and Mule Tape. Once you use mule tape you won't go back to rope. No burn through.

 

[infinity]

In lieu of PVC coated elbow, there is fiberglass elbow out there offered by Champion, has
anyone used it? Is it U.L. listed and Code compliance? Thank you!

Are you asking about a PVC coated RMC elbow?