CHECKING RESISTANCE

Status
Not open for further replies.

dferrara

Member
Location
Missouri
I WAS CALLED BY A HOMEOWNER WHO INSTALLED A SWIMMING POOL WITHOUT AN INSPECTION AND NOW HAS TO PROVE THE HANDRAILS ARE GROUNDED BY PROVIDING AN OHM READING TO THE INSPECTOR. MY QUESTION IS HOW TO ACCOMPLISH THIS. THANK YOU
 
Re: CHECKING RESISTANCE

Chip out enough finish material to get access to the rebar. Use a continuity indicator to confirm a bond. Use long wires for test leads.

Get the inspector to supply definite point to point testing requirements.

Does the inspector plan to witness the test? If not, take photographs of the results and procedure used.
 
Status
Not open for further replies.
Top