Class 1 / Div 1 Lighting_Sealed Fixtures

Status
Not open for further replies.
I am running a project that has a small class 1 / div 1 area that has approximately 30 R-A-L XPT luminaires that are "factory sealed". <br><br>I asked the engineer for the project "Does an external conduit seal need to be installed, in conjunction with the factory sealed fixture?" The answer was vague and non-descript: "The installation needs to follow the NEC" Of course I thought to myself!! I contacted the manufacturer as well, and came up with a simular, vague and general response that seemd like they were avoiding the liability of giving me an incorrect answer.<br><br>I would be grateful for any feedback or comments to help me fight this battle, because my interpretation is the "factory sealed" class 1 / division 1 luminaire satisfies the code article and exception 501.15 (A)(1)(1)(1)<br><br>
 

Attachments

  • Type XP_SA_SA-NL_RIG-A-LITE.pdf
    70.9 KB · Views: 0
Status
Not open for further replies.
Top