Have a 40VA, 120V/24V transformer in a box with 120V and 24V splices. (24V controls PE relays in same box, and remote thermostat.)
Is this considered Class-1 power limited therefore no separation of conductors of different voltage is required? All conductors are rated 600V.
Class 2&3 transformers have to be labeled as such, but class 1 transformers do not?
Is this considered Class-1 power limited therefore no separation of conductors of different voltage is required? All conductors are rated 600V.
Class 2&3 transformers have to be labeled as such, but class 1 transformers do not?