Class T in class R holder

[electrofelon]

Hey guys, I am not clear on this. Can I get an adapter to put a class T in an older safety switch that has class R fuses? I know for new switches you buy the kit for it, but I have an older switch that I highly doubt parts are available. Is this a general thing like a fuse reducer that can go in anything, or needs to be a specific part for the switch?

 

[jim dungar]

No.

Listing requirements specifically preclude fuse holders from accepting alternative fuse types (except Class R fuse can be installed in Class H clips).

 

[electrofelon]

No.

Listing requirements specifically preclude fuse holders from accepting alternative fuse types (except Class R fuse can be installed in Class H clips).

Thanks. Ok so the only option would be to see if GE ever made a class T kit for this and if it's still available?

 

[ptonsparky]

I'm sure I was able to move the fuse holders for Class R to Class J.

No.

Listing requirements specifically preclude fuse holders from accepting alternative fuse types (except Class R fuse can be installed in Class H clips).

IDK about H

 

[jim dungar]

I'm sure I was able to move the fuse holders for Class R to Class J.

Yes you can modify the location of the clips, thus changing between Class J and class R.
Class R fuse can be directly inserted into Class H fuse holders without modification.