Comments on Snap-Tite Fittings

[Natfuelbilll]

https://images.tradeservice.com/9ETBOIYK8205G6UU/ATTACHMENTS/DIR100024/ARLINGE00095_B1.pdf

Building out a 1,000,000 SQ ft warehouse. Looking for high productivity.

 

[peter d]

I love snap-in MC connectors. I'm not sure they are such a great idea with EMT.

 

[Sierrasparky]

If they hold as well as MC then I'd say go with them.

 

[jumper]

If they hold as well as MC then I'd say go with them.

Yep, if the EMT and box are secured properly, should be fine.

 

[macmikeman]

Tried some snap in romex connectors from the H.D. ONCE. So crummy it was very frustrating. Did not hold in place at all, kept popping out, which means to me- bad bonding right off the bat. I seem to have similar experiences with the mc snap ins as well. So I pull out my best Joisey accent out of the bag and say Fagetaboutit.........

Edit to add, I'm referring to the snap into the ko part of the connector , not the holding of the mc inside the connector. Those ones with no locknuts. Don't like em a bit.