Planning on installing a 1-1/4" PVC raceway between two buildings, approximately 8' off the ground. Raceway is for general 240V branch circuit conductors. Span is only 3' or so between buildings. Checking through the code, the height requirements/restrictions seem to be limited to open conductors. I could not find anything specific on conductors enclosed in raceways. Have I missed anything relative to height (min/max) restrictions/limitations for raceways between buildings?
Conduit between buildings
- Thread starter csoc64
- Start date
- Status
petersonra
Senior Member
- Location
- Northern illinois
- Occupation
- engineer
I think you are probably OK but I would be inclined to move it up so tall people cannot grab it as they walk under it.
Strathead
Senior Member
- Location
- Ocala, Florida, USA
- Occupation
- Electrician/Estimator/Project Manager/Superintendent
You will need flex for expansion between two buildings
- Status