Uamak
Member
- Location
- Deep Space
What is the requirement of in regards to fill percentage (EMT) for control wiring of AHU. Does chpt 9, table one apply....
CONDUIT FILL
- Thread starter Uamak
- Start date
- Status
Uamak
Member
- Location
- Deep Space
Conduit Fill
Conduit Fill
Re-phase of ?
WHAT IS THE REQUIREMENT FOR CONDUIT FILL IN REGARDS TO LOW VOLTAGE CONTROLL CIRCUITS. I HAVE A (AHU) CONTROLL PANEL CONDUIT THAT IS AT LEAST 90 PERCENT FILLED. DOES CHPT 9, TABLE 1 APPLY....
Conduit Fill
Re-phase of ?
WHAT IS THE REQUIREMENT FOR CONDUIT FILL IN REGARDS TO LOW VOLTAGE CONTROLL CIRCUITS. I HAVE A (AHU) CONTROLL PANEL CONDUIT THAT IS AT LEAST 90 PERCENT FILLED. DOES CHPT 9, TABLE 1 APPLY....
paul
Senior Member
- Location
- Snohomish, WA
Fill applies, derating does not.
iceworm
Curmudgeon still using printed IEEE Color Books
- Location
- North of the 65 parallel
- Occupation
- EE (Field - as little design as possible)
Uamak
Member
- Location
- Deep Space
The conduit comes from a 4x4 to the AHU control panel. I has only control circuits in it.
"You have not had enough coffee untill you can tread a sewing machine needle while it is running".
- Status